General Safety Directions; Identification Of The Machine; Specifications - Lega Daisy Bedienungsanleitung

1.0 GENERAL SAFETY DIRECTIONS

This handbook forms an integral part of the machine and should be kept with it throughout its working life.
Read this manual throughout before using the machine.
The machine includes dangerous electrically live and moving parts, which can cause serious damages to
persons or property in case of: incorrect use, removal of guards or disconnection of safety devices, poor
inspection and servicing. These directions must be completed and updated according to applicable legal
provisions.
The manufacturer may not be held responsible for failures, breaks or accidents resulting from incorrect use of the
machine or failure to follow the directions contained in this manual. Do not tamper with the electric system.

1.1 IDENTIFICATION OF THE MACHINE

Uncapping machine designed for cutting off the cappings on D.B. standard supers (also referred to as
frames), using electrically heated serrated knives on a chain conveyor, with varying forward velocity.

1.2 SPECIFICATIONS

Production capacity
Total absorption
Bedplate dimensions
Weight
1.3 MACHINE OPERATORS
CAUTION! FOR SAFETY PURPOSES, THIS MACHINE SHOULD BE USED BY SKILLED STAFF ONLY, AWARE OF
THE INSTRUCTIONS CONTAINED IN THIS MANUAL WHICH FORMS AN INTEGRAL PART OF THE MACHINE.
The uncapping machine has been designed for operation by a single worker.
Basic technical and mechanical skills are required to correctly operate the machine and carry out maintenance
and basic servicing.
1.4 DIRECTIONS / RECOMMENDED AND NOT RECOMMENDED USE
For efficient machine operation, the frame wood thickness must be constant and the use of spacers is
recommended.
The frames should not have any protruding parts e.g. nails or Hoffman spacers.
We recommend using supers with spacers at least one notch down from the hive frame number (e.g. for a 10-
frame beehive, use supers with 9 frames or better still, 8 frames).
This machine should be exclusively used for uncapping frames.
LEGA
srl
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
Frames/Hour 250
Watt 1600
mm 950x480x575
kg 37
14 / 53