STEAMAX REULEAUX RX GEN3 DUAL Bedienungsanleitung Seite 94

STEAMAX REULEAUX RX GEN3 DUAL – SELECTION & OPERATION OF THE MODES
Setting the TCR Mode (M1, M2, M3)
While the device is switched off, press the Fire button and the right Setting button simultaneously for a few seconds
to enter the TCR menu:
1. Press the left or right Setting button to switch between TCR M1, M2, and M3.
2. Press the Fire button to confirm the selected mode.
3. Press the left or the right Setting button to change the values corresponding to the coil of the head used.
4. Hold down the Fire button or wait 10 seconds to confirm the settings.
92
www.steamax.com