en - Signing a household appliance onto the WiFi net-
Options in the sub-menu
Miele@home system settings
Certain settings can be adjusted in Set-
tings mode on your refrigeration ap-
pliance via Miele@home system set-
tings.
WPS
WPS pushbutton
Wireless access point
(soft access point)
Reset WiFi module
WiFi module
default settings
– WPS pushbutton
As an alternative to networking via the
Miele@mobile App we recommend us-
ing WPS (Wireless Protected Setup).
To do so you will need a WPS-compat-
ible router.
Touch WPS.
For a certain time an attempt will be
made to create a WiFi link.
Activate the "WPS" function on your
router within two minutes.
Once connection has been created,
will appear in the display.
Confirm with
OK
The display changes to the start screen,
and appears in the top right.
If a connection could not be created,
the display shows .
You have probably not activated WPS
at your router quickly enough. Repeat
the steps above.
.
work via smartphone/tablet
– Wireless access point (soft access
point)
You can create a direct link from your
refrigeration appliance to your mobile
device (e.g. smartphone or tablet). This
connection is necessary in order to cre-
ate a network connection with the
Miele@mobile app.
A full description for this can be found
under "Signing on using the
Miele@mobile App", Integrating a
household appliance via a mobile
device".
Touch .
For a certain time an attempt will be
made to create a direct link.
Confirm the link creation at the mo-
bile device.
The display changes to the start screen,
and appears in the top right.
If no link is confirmed after approx. 15
minutes, the procedure is cancelled.
The display changes to the start screen.
43