Curling Your Hair; Automatic Switch-Off - Silvercrest QUICK CURL SHC 240 A1 Bedienungsanleitung

You have now made all required settings. You can change the settings at any
time by pressing the relevant button if you ascertain that the time/temperature/
turning speed is not ideal for your hair.

Curling your hair

Once you have made all settings on the appliance and the Temperature indicator
is permanently on (temperature reached):
1) separate a strand using the hair template
than the punched hole in the hair template
2) Lay the strand in the curling chamber
The opening of the curling chamber
must be directed towards your head. Hold the appliance about 5 cm from
your scalp.
3) Let go of the strand and press the Start button
and stops automatically after the set number of turns. The strand is wound
around the roller
As soon as the roller
down. As soon as the programmed time period has elapsed, you will hear three
beeps.
4) Pull the appliance away from your head so that the strand slips out of the
curling chamber
5) Proceed in the same way with the other strands.
6) When you are finished styling your hair, press and hold down the On/Off
button
7) Remove the power plug from the mains power socket.
8) As soon as the appliance has cooled down, put the protective cap
the appliance.
Automatic switch-off
This appliance is fitted with an automatic switch-off system. After 60 minutes, the
appliance will switch itself off automatically if you do not press any buttons.
NOTE
► The automatic switch-off is designed merely as a safety feature in case you
forget to switch off the appliance! The automatic switch-off is not intended
as a substitute for switching the appliance off with the On/Off switch
and pulling the plug out of the mains socket.
■ 24
│ GB
.
stops, you will hear a beep and the set time starts counting
.
until the display goes out.
. The strand should be no thicker
.
holding it straight and slightly taut.
, in which the roller
. The roller
can be seen,
starts to turn
onto
SHC 240 A1