Before First Use; Operation; Cleaning And Storage; Drying Hair - Silvercrest SHTD 2200 E1 Bedienungs- Und Sicherheitshinweise

Cleaning and storage

Store the product in a cool, dry
place, protected from moisture
and out of the reach of children .
˜ Before first use
Remove the packaging . Check if all parts are
complete .
NOTE: The product may give off some odour
during first use . These are production or transport
residue that will quickly subside .
˜ Operation
˜ Drying hair
(Fig . A)
Connect the power plug 6 to a suitable electrical
outlet .
Select the desired air flow and heat levels:
7
/ /
(Switch position)
8
/ /
(Switch position)
After use: Select
Disconnect the power plug 6 from the electrical
outlet .
26 GB/MT
Air flow
Product off
Product on: Gentle air flow
Product on: Strong air flow
Heat
No heat
Low heat
High heat
7 to switch off the product .
˜ Ionization mode
(Fig . B)
4
/
(Switch position)
NOTE: Remove the concentrator nozzle 11 and
diffuser 12 before using the ionization mode . This
optimises the ionization performance . Use strong
air flow ( 7 ) and high heat level (
ionization mode to dry hair quickly .
˜ Styling hair
Using the concentrator nozzle
Put the concentrator nozzle 11 on the air outlet
10 .
Rotate the concentrator nozzle 11 to change the
position .
Switch on the product . Use the concentrator
nozzle 11 to direct the air flow onto a specific
section of the hair .
NOTE: We recommended to use gentle air flow
( 7 ) and low heat level (
hair .
Using the diffuser
Put the diffuser 12 on the air outlet 10 (Fig . C) .
Switch on the product . Use the diffuser 12 to curl
the hair or to create gentle waves .
m
CAUTION! Do not remove the concentrator
nozzle 11 or the diffuser 12 when these
accessories are still hot .
Ionization LED 1
Ionization off
Ionization on
8 ) in
8 ) when styling
Off
On