Cooling Level; Drying And Styling Hair - Silvercrest SHC 2000 A1 Kurzanleitung

Blower levels
0
Heat levels
3) After use, switch the appliance off in that you place the blower level switch 4
into position "0". Then remove the plug from the wall socket.

Cooling level

With the cooling level button 6
combination of blower and heat levels (except level "0"). If you wish to create
a cold air stream, press and hold the cooling level button 6
longer need the cold air stream, release the cooling level button 6

Drying and styling hair

■ To quickly dry hair, we recommend first of all using a high blower and heater
setting for a short period. After drying the hair, switch to a lower blower and
heat level to shape the hairstyle.
With the supplied styling jet 1 you can apply a directed airflow to shape
■
and style your hair. Start by removing the finger diffuser 7 first with a
downwards snapping motion. Fit the styling jet 1 by pushing it with light
pressure onto the hair dryer so that it snaps into place and sits evenly on the
hair dryer.
If you no longer require the styling jet 1, wait until the appliance has cooled
down and pull it off with a downwards snapping motion:
■ 6 │ GB │ IE
The hair dryer is switched off
reduced air flow
full power air flow
low heating level
medium heat level
high heating level
you can produce a cooler air flow with any
. When you no
.
SHC 2000 A1