Proxxon DA3 Originalbetriebsanleitung Seite 97

Operating steps
• Move the tool electrode
along the Z direction to the
reference plance (zero
plane)
• Processing completed or
during processing
XYZ display Auxiliary display
The terminal depth value setting
The input confirmation and
turning into the normal display
The reference plane setting
Turning into EDM state and
starting electrical machining
X-axis display terminal depth
Y-axis display maximal depth
Z-axis display the current depth
Turning into the electrode wear
compensation setting state
compensation range
± 9.995 mm
Setting the compensation value.
In case of the value as 0.6 mm.
Confirming the input and tru-
ning into the normal display.
Back to the normal display
from the EDM state.
Note
- 97 -