Before First Use - Electrolux GA60KV220 Benutzerinformation

56 www.electrolux.com
• The end indicator comes on.
4.
Press button
goes off, the acoustic signals are de-
activated.
5. Deactivate the appliance to confirm
the setting.
How to activate the acoustic signals
1. Refer to 'How to deactivate the acous-
tic signals', step (1) through (3).
2.
Press button
• The indicators of buttons
and

6. BEFORE FIRST USE

1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
6.1 Adjusting the water softener
German
degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
. The end indicator
,
go off.
Water hardness
French
degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
< 7
•
The indicator of button
ues to flash.
• The end indicator is off.
3.
Press button
comes on, the acoustic signals are ac-
tive.
4. Deactivate the appliance to confirm
the setting.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
mmol/l Clarke
degrees
8.4. - 9.0 58 - 63
7.6 - 8.3 53 - 57
6.5 - 7.5 46 - 52
5.1 - 6.4 36 - 45
4.0 - 5.0 28 - 35
3.3 - 3.9 23 - 27
2.6 - 3.2 18 - 22
1.9 - 2.5 13 - 17
0.7 - 1.8 5 - 12
< 0.7 < 5
contin-
. The end indicator
Water softener
adjustment
Manual Elec-
tronic
1) 10
2
1) 9
2
1) 8
2
1) 7
2
1) 6
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1