6.4
Check the transmission oil level
f
Gear oil must not run into the ground. To
prevent this, put an oilpan underneath
the gear box.
– Park the truck and render it safe (see
chapter E).
– Unscrew oil filler screw (4).
– Check the gear oil level and top up, if
required (see section 5.1).
– Take off the cap (5).
– Turn the drive wheel until the oil filler
plug (6) is visible.
– Use a wrench filled with grease to un-
screw the oil filler plug (6).
– Use a small funnel to top up oil.
A
The oil must reach the lower edge of the
inspection bore.
m
Changed consumption type materials must be disposed of in accordance with the ap-
plicable environmental protection regulations.
6.5
Let off oil
– Let off oil at service temperature.
– Use an oil pan.
– Unscrew waste oil screw (7) and let off gear oil.
6.6
Refill oil
– Screw in waste oil screw.
– Fill in fresh gear oil with the oil filler screw (6) unscrewed.
F 10
4
7
5,6