Moving Of The Truck Without Own Drive - Jungheinrich EFG-DH ac 10 Betriebsanleitung

In order to prepare the truck for work following delivery or transportation, the following
operations must be performed:
–– Check equipment for completeness.
–– Check battery connections and acid level (refer to chapter D, section 6).
–– Check torque of wheel nuts (refer to chapter F).
–– Commission truck as specified
(refer to chapter E).
3

Moving of the truck without own drive

If the truck must be put on tow, proceed as follows:
–– Connect tow-bar or tow to the trailer coupling of the recovery vehicle and to the
truck to be recovered.
–– Remove battery plug (refer to chapter D).
–– Release parking brake.
f
A person must sit on the driver`s seat of the truck on tow in order to do the steering.
Do not drive the truck on tow faster than walking pace.
A
Since the truck's steering booster is switched off, a higher expenditure of force is nec-
essary to steer the truck.
C 2