Operating The Unit; Clock Setting - auna 10022749 Bedienungsanleitung

LCD DISPLAY WINDOW
A. SLEEP INDICATOR
B. TIMER INDICATOR
C. ALBUM/RADIO MEMORY NUMBER INDICATOR
D. STEREO INDICATOR
E. VOLUME HIGH/LOW INDICATOR
F. TRACK/NUMBER/TIME INDICATOR
When you first plug the unit into the AC outlet, then press the power switch on the bottom of the unit,
the unit will be in standby mode, the black light of standby is red. You can now press the STANDBY/
ON button on the unit or on the remote control to switch the unit ON. The black light of the multi-
function display will light on blue. Pull the AC plug out of the wall socket if you want to switch off
completely.
POWER/STANDBY
1. Press the STANDBY/ON button on the unit or on the remote control to switch the unit on.
2. Select the sound source (CD, USB, CARD, BT, AUX or TUNER) by pressing the MODE button. The
corresponding display will light up.
3. Adjust the volume with the VOLUME (+ or -) button on the unit or VOLUME (+ or -) button on
the remote control.
4. Press the STANDBY/ON button again to turn off the unit.
Note:
1. If there is no signal under the CD/USB DEVICES/ SD CARD/ iPod mode, the main unit will be
switched off within 15 minutes automatically.
2. During in standby mode, press any button/key can make the display light for 10 seconds.
3. During in iPhone/iPod/iPad mode, the iPhone/iPod/iPad player inserted on the iPod docking bracket,
the main unit will be switched to Standby mode automatically after 4 hours which convert to iPod
mode start the timer. In the 10 minutes before the unit switched to Standby mode, the display
will show "Auto OFF" and flash. Press the "INTRO" button to resume playback, time for 4 hours
again.
4. Please turn the main switch off to save energy, when you do not use the unit.

CLOCK SETTING

During in the STANDBY mode.
1. Press and hold the MEMORY button until the time displays will change to 12-hour (or 24-hour)
digit and flash.
2. Press the SKIP/TUNE SEARCH (UP or DOWN) button to adjust 12-hour or 24-hour digit.
3. Press the MEMORY button again, the HOUR digit will flash on the display, press the SKIP/TUNE
SEARCH (UP or DOWN) button to adjust HOUR digit.
4. Press the MEMORY button once more, the MINUTE digit will flash on the display, press the SKIP/
TUNE SEARCH (UP or DOWN) button to adjust MINUTE digit.
5. Press the MEMORY button again to confirm the time.
6. Each enable state as shown above will be cleared if the key is not pushed in10 seconds.

Operating the Unit

14