Piezotome Function - Satelec Implant Center 2 Bedienungsanleitung

Confirm the torque adjustment by pressing button
Note: The instrument torque can be adjusted directly using buttons
program , even when the multifunction footswitch is switched on.
f) Selecting footswitch type
Change the footswitch type if necessary by pressing button
and progressive
g) Completion of setting adjustment
Confirm the new settings by pressing button
The storing of the various settings is confirmed by an audible signal.
Repeat this sequence if necessary in order to adjust all the programs.

7. 6 PIEZOTOME FUNCTION

Important:
The P function settings can be customized by the user.
IEZOTOME
The P function settings can be adjusted when no P
IEZOTOME
device.
The program giving the highest power is D1.
Very powerful
Powerful
Medium
Low
Select the Piezotome function by pressing button
button (Fig. 11-5).
On the LCD screen, the P
Select the program to be used by pressing button
footswitch button (Fig. 11-3); the selected program is highlighted on the LCD screen.
Adjust the programs and the power level according to the tip data sheet recommendations.
If necessary, modify the irrigation function (flow rate value, etc.) (refer to 7.3).
If necessary, modify the program power level (1 to 5) using buttons
The power level of the program concerned is shown as a number and a bar-graph
Modify the footswitch type if necessary by pressing button
and progressive .
.
Program
D1
D2
D3
D4
tab must be highlighted.
IEZOTOME
(Fig. 7-30); the main screen is displayed.
(Fig. 3-10) to toggle between ON/OFF
(Fig. 3-8).
IEZOTOME
Main functions
Osteotomy, osteoplasty
Soft tissue detachment
(Fig. 3-12) or by pressing the footswitch
, ,
(Fig. 3-10) to toggle between ON/OFF
or (Fig. 3-6 and 3-7) for
2 handpiece is connected to the
or (Fig. 4-14) or using the
(Fig. 3-6) and (Fig. 3-7).
(Fig. 4-13).