Mettler Toledo IND131 Installationsanleitung Seite 36

4. Mark the position of the mounting holes on the vertical surface per the dimensions shown in
64067480 | 11 | 05/2018
Remove nuts
and ground
straps from
these bolts
Figure 2-21: Loosening the Ground Straps
C. Carefully rotate the front cover 180 degrees and reattach the two grounding straps to the
two studs near the grip bushings using the two nuts removed in the previous step as
shown in Figure 2-22. Tighten the two nuts.
Figure 2-23.
METTLER TOLEDO IND131/IND131x/IND331/IND331xx Installation Manual
Figure 2-22: Reversing the Cover
When cover is
reversed, straps
attach to these
bolts
Video/keyboard
harness
2-13