Terminal Versions - Mettler Toledo IND131 Installationsanleitung

•
•
•
•
•
•
•
•
•
•
•
1.2.

Terminal Versions

The terminals are available in the following versions:
•
•
•
•
•
•
•
1-2 METTLER TOLEDO IND131/IND131x/IND331/IND331xx Installation Manual
Support for the following option boards:
 COM2 and Discrete I/O interface (includes Modbus RTU protocol)
 Choice of one PLC interface:
o 4-20mA Analog Output
o Allen Bradley RIO
o CC-Link
o ControlNet™ (for DC version only)
o DeviceNet™
o Ethernet/IP
o Modbus TCP
o PROFIBUS
Front panel key access to basic weighing functions – zero, tare, clear and print
Latching target control to provide one- or two-speed feeding control with the press of a start
button
Rate calculation used for comparator source or communicated to a PLC
Comparators - simple coincidence setpoints for comparison of weight or rate with absolute
target values or ranges
Selectable unit of measure including grams, kilograms, pounds, tons
Backup and restore of configuration and calibration settings, using SD memory device or
InSite™ PC tool
TraxEMT™ performance monitoring and recording
CalFREE™ calibration without test weights
Scale calibration via A-B RIO, CC-Link, ControlNet, DeviceNet, Ethernet/IP, Modbus RTU and
Modbus TCP, and PROFIBUS interfaces.
Models IND131xx and IND331xx are certified for use within hazardous (explosive) areas
classified as Division 2 or Zone 2 or 22.
IND131 DIN rail mount, AC power
IND131 DIN rail mount, 24 VDC power
IND131xx DIN rail mount, 24 VDC power, Division 2 and Zone 2/22 certified
IND331 Panel-mount, AC power
IND331 Panel-mount, 24 VDC power
IND331xx Panel-mount, 24 VDC power, Division 2 and Zone 2/22 certified
IND331 Harsh, AC power
®
®
DP
64067480 | 11 | 05/2018