Shortcuts for DataView
®
desktop.
NOTE: If you connected your instrument to the computer before installing the software and drivers, you may need to use
the Add/Remove Hardware utility to remove the instrument driver before repeating the process.
7.2. OPENING THE CONTROL PANEL
The Control Panel can be opened from the DTR icon or from DataView
To open the Control Panel using the desktop icon:
Double-click the DTR Icon that was created during installation, located on the desktop.
The Connection window will appear. Click OK.
To open the Control Panel from DataView
Double-click on the DataView icon on your desktop. The DataView
displayed for a few seconds and then the Quick Start dialog box will appear (see Fig. 7-5).
and each instrument control panel selected during the installation process have been added to your
:
®
.
®
Figure 7-4
splash screen with a logo and relevant information will be
®
Figure 7-5
69