Configuring The One Touch Buttons - Xerox DocuMate 152 Benutzerhandbuch

Configuring the One Touch Buttons

Right-click on a button (for example,
button 2) and the Properties window
opens for that button.
DocuMate 152 Scanner User's Guide
Each One Touch button configuration consists of a Destination
Application, a Scan Configuration, and a Document Format.
The One Touch Properties window is where you select these three
elements for a button.
To open the One Touch Properties window:
1. Click the One Touch icon. It is located in the Windows
Notification Area at the bottom right corner of the screen.
2. Right-click a button on the One Touch Button Panel.
REMINDER: Remember that left-clicking a button on the One
Touch Button Panel starts the scanner scanning. Right-clicking
opens the One Touch Properties window.
The One Touch Properties window opens for that button.
The One Touch Properties window also opens when you press,
hold down, and release the Simplex or Duplex button on the
scanner.
NOTE: Some of the options on the One Touch Properties
Window (and other One Touch windows and dialog boxes) are
"grayed out" and are not available. Grayed out options are not
appropriate for your Xerox DocuMate 152 scanner.
Scanning
31