Assembly - Klarstein 10032345 Bedienungsanleitung

ASSEMBLY

1 Ensure that the product is switched off and disconnected from the power supply.
2 Place the main unit onto the stand. Secure the main unit with the main unit's nut.
3 Place the back guard onto the main unit. Make sure to align the insets of the main
unit with the grooves on the back guard .
4 Secure the back guard with the back guard's nut.
5 Place the blade on the shaft. The cross pin on the shaft must fit into the indentation
on the rear part of the blade.
6 Secure the blade with the spinner.
7 Place the front guard onto the guard collar. Make sure the 8 grooves on the guard
collar properly click into place at the edge of the front guard. The hook of the guard
collar needs to be hooked into the rear guard.
8 Secure both guards with the locking hinged clip and secure with a screw.
Height adjustment
1 Push and hold the height adjustment button.
2 Pull the upper part of the main unit up/down to choose an optimal position.
3 Release the height adjustment button.
EN
11