Assembly - Klarstein Standventiltor Bedienungsanleitung

ASSEMBLY

1
Place the weight of the base under the
base and insert the lower tube through
the holes of them. Fix the parts together
by using the nut provided.
3
Connect the upper tube to the middle
tube by screwing them together. The
upper tube has 2 holes on the top.
2
Connect the middle tube to the lower
tube by screwing them together.
4
Insert the power cord through the base,
the bottom tube, the middle tube and the
upper tube. The connector of the power
cord should come out a little bit from the
upper tube.
EN
15