Assembly - Klarstein Sonnenwind Bedienungsanleitung

ASSEMBLY

Installing the Base
• Turn the adjustment knob on the lower tube counterclockwise. Pull the upper tube
out of the lower tube as far as it will go. Then tighten the adjustment knob clockwise.
• Remove the screw from the base.
• Place the lower tube on the recess in the base.
• Connect the base to the lower tube by retightening the screw.
Adjustment knob
Screw
Installing the motor housing
• Loosen the adjustment knob on the motor housing.
• Place the motor housing on the upper tube and tighten the adjustment knob again.
Adjustment knob
Lower tube
Recess
Place the
housing on the
tube
EN
19