Error Code - DENTSPLY x-smart plus Gebrauchsanleitung

8.

Error Code

If the motor handpiece stops due to an abnormality such as a malfunction, overload or
breakage due to misuse, it automatically checks the state of the control unit. It detects the
cause of the abnormality and displays an error code on the LCD panel. If an error code is
displayed, turn on the power again and check whether the same error code is displayed.
Should this be the case, refer to the instructions provided in the "Check/Remedy" column in the
following table.
In case of error, the display will for example read:
NOTE
If the battery is replaced while the AC adapter is connected, an incorrect error may be
displayed.
- 36 / 208 -
FISDR-JAP / F1902124.X / 00 / 2011 – created 07/2011