SWM RS 300 R Handbuch Seite 119

BRAKE PADS REMOVAL
- Remove clips (1).
- Slide out pin (2).
- Remove pads.
WARNING*: Do not work the brake lever or ped-
al while removing the pads.
FRONT
1
2
PADS WEAR
Check brake pad wear.
Respect the service limit "A" indicated in the relative
figures.
If service limit is exceeded, always replace the pads
in pairs.
FRONT
A= 4 mm
(0.15 in.)
REAR
1
REAR
A= 6,5 mm
(0.25 in.)
2
EN - 47