General Information - WIKA Obsolete CPH65I0 Betriebsanleitung

1 General Information

1 General Information
The CPH65I0 intrinsically safe hand-held pressure calibrator described in the operating
■
instructions has been manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the CPH65I0 intrinsically
■
safe hand-held pressure calibrator. Working safely requires that all safety instructions and work
instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations for the
■
range of use of the CPH65I0 intrinsically safe hand-held pressure calibrator.
The operating instructions are part of the instrument and must be kept in the immediate vicinity
■
of the CPH65I0 intrinsically safe hand-held pressure calibrator and readily accessible to skilled
personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions, prior to
■
beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the product
■
contrary to its intended use, non-compliance with these operating instructions, assignment of
insufficiently qualified skilled personnel or unauthorised modifications to the CPH65I0
intrinsically safe hand-held pressure calibrator.
The general terms and conditions, contained in the sales documentation, shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with international
■
standards.
Further information:
■
- Internet address:
- Relevant Data Sheet:
- Application consultant:
WIKA Operating Instruction, Model CPH65I0
www.wika.de / www.wika.com
CT 14.51
Tel.: (+49) 9372/132-9986
Fax: (+49) 9372/132-8767
E-Mail: testequip@wika.de
GB
5