Setting The Resistance Thermometer Probe; Damping / Average Reading - WIKA Obsolete CPH65I0 Betriebsanleitung

6 Commissioning, operation

6.5.7 Setting the resistance thermometer probe

Use the "PROBE TYPE" option of the 'RTD Probe Type' main menu to access the menu for
resistance thermometer probe selection.
GB
There are four types of resistance thermometers: "P100-385", "P100-392", "P100-JIS" and
"CUSTOM". With "CUSTOM", custom resistance thermometers can be selected. Use the
"SELECT" option to select the desired probe type and the "DONE" option to store the change and
return home.
The default resistance thermometer type is "P100-385" (Pt100-385).

6.5.8 Damping / Average reading

Damping / Average reading can be turned ON or OFF using the damping menu selection. As soon
as the damping function is switched ON, the calibrator displays the running average of the last ten
measurements. The calibrator makes approximately three readings per second.
24 WIKA Operating Instruction, Model CPH65I0