Personnel Qualification; Skilled Personnel; Special Hazards - WIKA OT-1 Betriebsanleitung

2. Safety
The technical specifications contained in these operating instructions must be observed. Improper handling or opera-
tion of the instrument outside of its technical specifications requires the instrument to be taken out of service immedi-
ately and inspected by an authorised WIKA service engineer.
GB
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.
2.2 Personnel qualification
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to equipment.
The activities described in these operating instructions may only be carried out by skilled personnel who
have the qualifications described below.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training, knowledge of measurement
and control technology and on their experience and knowledge of country-specific regulations, current standards and
directives, are capable of carrying out the work described and independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.

2.3 Special hazards

WARNING!
For hazardous media such as oxygen, acetylene, flammable or toxic gases or liquids, and refrigeration
plants, compressors, etc., in addition to all standard regulations, the appropriate existing codes or
regulations must also be followed.
WARNING!
Residual media in dismounted pressure transmitters can result in a risk to persons, the environment and
equipment.
Take sufficient precautionary measures.
6 WIKA operating instructions OEM pressure transmitter, model OT-1