en - Configuring the interface
Opening the
menu
42
Configuring the network interface
The interface must only be configured by suitably qualified and
competent persons.
Switch the washer-disinfector on using the button.
You must wait at least 90 seconds before starting to configure the
interface.
Open the menu as follows:
button
Further settings
Interface
Ethernet
Select the
The following options are available:
Module status
–
Connection status displayed.
DHCP
–
The Ethernet interface can either be implemented via a Dynamic
Host Configuration Protocol (DHCP) or by setting one of the follow-
ing parameters:
IP address
–
–
Subnet mask
Standard gateway
–
–
DNS server automatic
DNS server 1
–
DNS server 2
–
Port type
–
Port
–
Interface
Ethernet
RS232
interface and confirm your choice with OK.