Intended Use
General-purpose cordless Vacuum Cleaner for general smaller
cleaning tasks on dry dirt.
Unpacking the Tool
Carefully unpack and inspect your cordless Vacuum Cleaner.
Familiarise yourself with all its features and functions.
Ensure that all parts of the tool are present and in good condition. If
any parts are missing or damaged, have such parts replaced before
attempting to use this tool.
Before Use
Please note that that battery and charger are not included with the
tool.
Removing a Battery from the Tool
To remove the battery (4) from the tool, press the battery release
button (11), then slide the battery off the hand grip (3).
WARNING: Do not try to remove the battery without pressing the
battery release button. The Vacuum Cleaner or battery could be
damaged.
Fitting a Battery
To fit a charged battery, slide it on to the hand grip (3) of the Vacuum
Cleaner until it clicks and locks into position.
Note: Make sure the battery and Vacuum Cleaner are lined up
correctly. If the battery does not slide into the tool easily, don't force it.
Instead, slide the battery out of the tool again, check the top of battery
and the Vacuum Cleaner battery slot are clean and undamaged and
that the contacts are not bent.
Setting up the Battery Charger
(Battery and Charger not included)
1. If fitted, remove any battery from the battery charger.
2. Insert the battery charger mains plug into a suitable mains socket.
Operation
14