Before first Use
Remove the device and the accessory out of the packaging. Keep packaging
materials out of reach of children. There is risk of suffocation!
Clean all parts of the device before using the first time.
Installing the Charging Station
The vacuum cleaner comes with a specially designed charging station (9) used to
hold the unit so that it can be recharged while mounted on the wall.
1. Place the charging station against the wall at the desired position. Use a spirit
level to make sure it is vertically positioned.
2. Use a sharp pencil to draw the mounting holes on the mounting surface.
3. Drill holes at the marked positions.
4. Use the supplied screws and wall plugs (10) respectively other suitable
installation material that is required according to the surface and install the
charging station on the wall (refer to figure A).
Note: Before installing the charging station ensure that no power lines can be
damaged that may be hidden in the wall.
Crevice Attachment
with Attachment for
Wet Vacuuming
Using
11
Charging Socket
for Power Supply
A