Herunterladen Diese Seite drucken

GRAUPNER ACRO MAXIE Bauanleitung Seite 19

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The kit is highly pre-fabricated. Nevertheless, the procedures described in these instructions should be
carried out with the greatest care in order to ensure that the model flies safely and successfully.
Electric power system and accessories
Power
Motor
controller
variant
Order No.
Sport
COMPACT 460 Z
11.1 V
45BEC
7748
High-
COMPACT 540
performance
14.4 V
7721
It is important to obtain all the accessories required for your selected power variant before you start
construction, as the components will need to be trial-fitted and installed at the appropriate stage.
RC system and accessories
This model should only be flown with an FM radio control system with six or more channels, e.g. the
mx-12 to mc-24 RC sets. For more information about radio control system accessories please refer to
the main FS catalogue, or the operating instructions supplied with your radio control system.
You will need the following additional components in order to operate the model:
4
C 3341 ECO wing-mounting servo
1
Servo extension lead, 320 mm
2
Servo suppressor filter
1
R700 receiver
1
Receiver crystal
Building the model
Use UHU plus schnellfest (fast-setting epoxy), Order No. 962, as adhesive throughout the construction
of this model, unless specifically stated otherwise in the building instructions.
Thoroughly sand all areas inside the fuselage where parts are to be glued.
Allow plenty of time for glued joints to set hard. The glue must be completely cured before you resume
construction.
Building instructions
Cut a slot 3.2 x 15 mm in size for the outer sleeve of the rudder "snake" (18), and check that the fin (9)
is an easy sliding fit in the opening in the tail end of the fuselage; ease the slot if necessary. Glue the
plywood nut support (5) to the underside of the tailplane mount on the fuselage (4).
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler!
Folding propeller
Order No.
CAM FOLDING
PROP
1335.30.15 plus
taper collet 6062.2
CAM FOLDING
PROP
1335.30.15
Order No. 5120
Order No. 3935.32
Order No. 1040
Order No. 3551
Order No. 3265...
Flight battery
Order No.
GRAUPNER LiPo
3/2100, 11.1 V / 2.1 Ah
7643.3
GRAUPNER LiPo
4/4300, 14.8 V / 4.3 Ah
7656.4
Id.-Nr. 0058032
01/2008
Speed
Order No.
BRUSHLESS
CONTROL
7235
GRAUPNER
GENIUS 40
2896.G35
19

Werbung

loading