Herunterladen Inhalt Inhalt Diese Seite drucken

Electrical Connection; General Information; Electrical Data - JUMO PINOS L02 Betriebsanleitung

Vorschau ausblenden Andere Handbücher für PINOS L02:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5

Electrical connection

5.1

General information

CAUTION!
The electrical connection must only be carried out by qualified personnel.
The temperature of 60 C can be exceeded at the connection terminals.
The choice of cable material, the installation, and the electrical connection of the device must conform
to the requirements of VDE 0100 "Regulations on the Installation of Power Circuits with Nominal Voltag-
es below 1 000 V" or the appropriate local regulations.
The device must be completely disconnected from the mains voltage if there is a risk of contact with live
parts during work on the equipment.
In addition to a faulty installation, incorrectly set values could also impair the orderly function of the down-
stream process or lead to other damage. Access to settings should only be given to qualified personnel.
Please observe the corresponding safety regulations in this context.
5.2

Electrical data

Voltage supply
Requirement
EMC
Interference emission
Interference immunity
Current consumption
5 Electrical connection
DC 24 V ±10 %, SELV
The device must be equipped with an electrical circuit that
meets the requirements of EN 61010-1 with regard to "Limited-
energy circuits".
Acc. to DIN EN 61326-1
Class A – only for industrial use
Industrial requirement
Analog output – flow sensor: ≤ 150 mA
Switching output – flow switch: ≤ 350 mA
19

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis