Working In File Mode - AEG DVD 4550 HDMI Bedienungsanleitung

Vorschau ausblenden

Inhaltsverzeichnis

Verfügbare Sprachen

Adjusting the volume

Creating a playlist (DVD)

Deleting a playlist (DVD)

Using CD/DVD

Repeat pressing the the button to choose a different viewing angle, or

to return to the original viewing angle.

Press the VOLUME + button (Fig. 3/10) to increase the volume.

Press the VOLUME - button (Fig. 3/11) to reduce the volume.



NOTE:

Please remember, that this will only change the output volume of the

DVD-Player. In order to adjust the volume to your requirements you

may also have to change the volume of the playback device.

It is possible that you may not wish to play the titles in the same order

that they are to be found on the DVD. The function "Create Playlist" you

can create your own playing order.

To do this, proceed as follows:

1. Press the PROG button (Fig. 3/1). A table is displayed. Here you can

enter the desired order of the chapters/titles.



NOTE:

However, your playlist will be lost when switching off the DVD-

Players or when inserting a new DVD.

2. Use the Cursor Buttons (Fig. 3/24) to navigate in the table.

3. Enter the desired title and chapter at the relevant position in the

table. Use the Numerical Buttons (Fig. 3/30) for this purpose.

4. Store your entry by selecting the " Play" command with the Cursor

Buttons (Fig. 3/24) at the edge of the table.

5. Press the ENTER button (Fig. 3/14) on the remote control to confirm

this command.

1. Press the PROG button. You will now see a table.

2. Use the Cursor Buttons (Fig. 3/24) to go to the "Clear program"

command at the edge of the table.

3. Press the ENTER button (Fig. 3/14) on the remote control to confirm

this command.

4. Press the PROG button to terminate this procedure.