Pneumatic Connections - EKOM DK50 2x2V/110 Benutzerhandbuch

13. PNEUMATIC CONNECTIONS

13.1. Compressed air outlet (Fig. 8)
Route the pressure line from the compressed air outlet (1)
on the compressor to the device.
Route the pressure hose through the opening in
the rear wall of the cabinet for cabinet-mounted
compressors.
13.2. Connecting the cabinet pressure gauge hose to the compressor (Fig.9)
Remove the threaded plug from the pneumatic block
on the compressor. Connect the cabinet pressure
gauge hose to the threaded fitting.
13.3. Condensate outlet (Fig.10)

Connect the condensate drain hose to the condensate collecting bottle on compressors
with dryers.
Fig. 10

Route the hose through the opening in the rear wall of the cabinet for compressor models
with a dryer.
NP-DK50 2x2V 110-2_10-2018-MD A
Fig. 8
Fig. 9
- 20 -
DK50 2x2V/110
1
2
1
10/2018