Intended use
The Wallbox is a charging station for indoor and outdoor use on which
electric or plug-in hybrid vehicles can be charged. No other devices, such as electric tools, may be
connected to it. The Wallbox is designed for installation on a wall or on a pedestal. Comply with the
relevant national regulations for installing and connecting the Wallbox.
The intended use of the device in every case includes compliance with the ambient conditions for
which this device was developed.
The Wallbox was developed, manufactured, tested and documented on the basis of the relevant safety
standards. If you comply with the instructions and safety information described for its intended use,
the product therefore normally will not pose any danger in terms of property damage or to the health of
people.
The instructions contained in this manual must in any event be followed to the letter. Otherwise
sources of danger may be created or safety equipment may be rendered inoperable. In addition to the
safety information provided in this manual, the safety and accident prevention regulations relating to
the specific device must be followed.
Not all versions / options are available in all countries as a result of technical or statutory restrictions.
About this manual
This manual and the functions described in it are valid for devices of the following type:
BMW i Wallbox
The illustrations and explanations contained in this manual refer to a typical version of the device. Your
device version may differ from this.
This manual is aimed at the following target groups:
End customers (users of the Wallbox)
Commissioning technicians, service technicians
27