Setting The Transponder Type - Hafele DT 100 Montage- Und Bedienungsanleitung

Mounting and Operating Instructions

Setting the transponder type

The DT 100 can be used with Tag-it® ISO as well with LEGIC® prime
media. For this the desired transponder type has to be initialised prior to
the terminal setup:
After the DT 100 has been mounted and the batteries have been inserted,
or after a reset, a transponder of the desired type, i.e. Tag-it ISO or LEGIC
prime has to be presented to the reader. This can be a Beamcard, a
Programming Key or a blank transponder media.
From then on the DT 100 will only read this type of transponder.
DT 100 - Status: 087.2011 - 732.29.137 57