Tintometer SD 300 pH Bedienungsanleitung Seite 44

Set Logger: Adjustment of the logger function
Set Clock: Adjustment of the real time clock
rEAd CAL: Read of the calibration data:
see Chapter 11.2 Calibration data memory (rEAd CAL)
(*) If there is data in the logger memory, parameters marked with (*) cannot
be opened. If they need to be changed, the data must first be deleted!
(**) With the logger running, parameters marked with (**) cannot be opened.
44
Selection of the logger function
CYCL Cyclic: Logger function of cyclical
logger
Stor Store: Logger function
Single value logger
oFF
No logger function
0:01 - 60:00 Cycle time in [minutes:seconds]
with cyclical logger
HH:MM Clock: Adjustment of the clock
hours:minutes
YYYY Year: Adjustment of the
calendar year
DD.MM Date: Adjustment of the date
Day.Month
**
*
**
SD_300_pH_1 01/2013