Connections; Pop-Up Clip - Tintometer SD 300 pH Bedienungsanleitung

4.3 Connections

4.4 Pop-up clip

Handling:
- Pull at label "open" in order to swing open the pop-up clip.
- Pull at label "open" again to swing open the pop-up clip further.
Pop-up clip closed
Function:
- The device with a closed pop-up clip can be plainly laid onto a table or attached to a belt, etc.
- The device with pop-up clip at position 90° can be set up on a table, etc.
- The device with pop-up clip at position 180° can be suspended from a screw or the
magnetic holder GMH 1300.
Device attached to a belt
34
Universal output: Interface, supply, analogue
output (see chapter)
BNC socket: Connection for pH or redox elec-
trode. Waterproof to IP65 with appropriate
cable!
Banana socket:
Pt1000 connection or NTC 30k temperature sensor
With electrodes with integrated temperature-
sensor, the banana socket is connected
on the outside.
With a separate reference electrode it is con-
nected on the inside.
Pop-up clip at position 90°
Device set up on a table
Pop-up clip at position 180°
Device suspended from
magnetic holder
SD_300_pH_1 01/2013