Scoop out the particles floating on the
detergent liquid.
Pump the detergent fluid in a suitable
container.
If the oil swims on the detergent fluid,
then stop pumping when oil starts com-
ing out of the pump. Scoop out the oil
by hand and dispose off according to
the local regulations.
Rinse container and pump with water.
Check status of hose pipes.
Replace the basin.
Only for PC 100 M1 BIO
Caution
Risk of damage to the hose pipe in the con-
tainer if it comes in contact with the heating
element. Replace the basin in such a way
that the pump in the tank is located on the
same side as the locking valves of the
cleaning tools.
Only PC 100 M2 BIO Replace the lock
pins.
Remove rinsing floor.
Remove filter mat.
Insert new filter mat.
Hold the old filter mat over the new filter
mat and wring it out.
Please dispose off used filter mats ac-
cording to the local regulations for spe-
cial wastes (see "Instructions for
disposal").
Replace the rinsing floor.
Pour back the detergent into the device.
If the indicator lamp glows, pour 20 liter
detergent fluid RM PC-BIO into the ba-
sin.
Maintenance contract
You can enter into a maintenance contract
with the concerned Kaercher Sales Office
for the machine.
Disposal information
The following EC waste codes are applica-
ble to the filter mats and the detergent liq-
uids:
Filter mat
RM PC-BIO 10
RM PC-BIO 20
RM microbe
liquid
– 7
EN
130899, Oil waste
a.n.g.
070601, Watery wash-
ing liquids due to the
use of detergents
161002, Watery liquid
wastes; not mentioned
elsewhere in the list
21