BEEM - Elements of Lifestyle
6. Pull out the operating lever of the steam
nozzle by turning it back and forth (image D).
D
7. Put ALL parts including the milk container
into the dishwasher, put the smaller items
into the cutlery basket.
8. Allow all items to dry properly.
9. Reassemble in reverse order: first attach
the operating lever of the steam nozzle.
10. Close the lid. For this purpose, hook the
cover onto the side (image E1) and press the
other side of the cover until it audibly snaps
in (image E2).
E1
11. Finally attach the silicon tube and the
steam nozzle attachment.
12. Close the silicon cover on the top of the
lid.
NOTE
►
The milk container (5) and all lid parts
can be cleaned in the dishwasher.
Descaling the appliance .
In order not to impair the service life of the
appliance and the quality of the espresso and
coffee, the appliance must be descaled at
regular intervals. The intervals between des-
caling depend on the water hardness (in the
case of hard water after 80 coffees; and soft
water after 150 coffees).
E2
To descale the appliance, proceed as follows:
1. Fill the water tank and milk container with
water and citric acid (5% solution) up to the
MAX mark.
2. Put a suitable receptacle onto the resting
grate of the drip trays (16 or 17).
3. Push the strainer holder (15) with strainer
insert (10 or 11) into the appliance as de-
scribed in the section Inserting the strainer
insert (page 23).
4. Press the selector button
cup of espresso.
5. After the descaling solution has run
through, allow to work for approx. 10 min-
utes. Then allow one more cup of descaling
solution to run through.
6. Press the selector button
preparing milk/extra froth to descale the
steam nozzle.
7. Pour the water and remaining descaling
solution collected away.
8. Rinse the water tank (3) and the milk con-
tainer (5) and repeat the process with fresh
water.
9. Also repeat the Latte function
10. Wash all removable parts with warm wa-
ter and detergent before brewing espresso or
coffee again.
NOTE
►
If you use a commercially available de-
scaling agent, observe the manufacturer's
instructions for use.
►
If the appliance is severely scaled, it
may be necessary to repeat the descaling
process.
Storage
If you do not intend to use the appliance for
a longer period of time, clean it as described
in the section Cleaning and maintenance
(page 27).
Store the appliance and all accessory parts
at a dry, clean and frost-free location which is
protected against direct sunlight.
EN 29
(12) as for a
(13) as for
(13).