Update Of The Receiver Software; Software Update Via Satellite; Update Via Usb - Smart Electronic CX20 Bedienungsanleitung

7.4.5

Update of the Receiver Software

There are two possibilities to update your receiver:
7.4.5.1

Software Update via Satellite

If you receive your TV signal via Astra 19.2°E, then you can perform an update of the
receiver software via satellite:
In the menu Tools, select the submenu S/W Upgrade by.
1. Leave all settings unchanged (factory settings).
The option of software update via satellite is only possible via
Astra 19.2°E. Correspondingly, all settings should be left un-
changed in the status as preset by smart:
)
2. Mark the button Start by using the keys
pressing the OK key.
Now it is being checked if the software currently installed on the receiver is up-
to-date. If it is not up-to-date, then the current software version will be down-
loaded via satellite and installed onto the receiver. After end of installation you
will be asked if the update should be saved.
3. Select the option Yes to accept the update.
The satellite update may take up to one hour. Do not switch off the receiver
during such period!
7.4.5.2

Update via USB

1. Search for the upgrade file on the internet page www.smart-electronic.de
(menu item Support) and save it to a USB data storage.
2. Unpack the file with the ending .abs and copy it to the USA data storage.
smart CX20
Line
Satellite
Transponder
Frequency
Symbol rate
Polarization
Download PID
Extended Settings and Functions
Target value
(1/1) Astra 19.2°E
(61/84) 12604 H 22000
12604
22000
H
343
/ PR+ and / PR-, and confirm by
143