Raps System; Menu Tools; Software Version; Factory Settings - Smart Electronic CX20 Bedienungsanleitung

7.3.5

RAPS System

The window RAPS System displays at
Last changes from the date of the
RAPS file on the receiver.
¾ Select RAPS Mode to determine if the channel list should be completely recre-
ated or only be updated after resetting to factory settings.
¾ Select Auto RAPS Scan to determine if the automatic update function should
be activated.
¾ Select Start to manually start new configuration or updating.

7.4 Menu Tools

7.4.1

Software Version

The sub-menu Information displays the current version number of the smart CX20
software.
7.4.2

Factory Settings

If you erroneously saved wrong settings or if you want to pass on the receiver with-
out your settings, then you can reset the receiver to the factory settings (reset):
To reset the receiver:
1. In the menu Tools, select the sub-menu Factory Settings.
2. Press the OK key.
You will be asked if you want to reset the receiver and delete individual settings.
3. Select Yes or No by using the keys /
After resetting your receiver, the language selection menu will be displayed.
7.4.3

Display Setting

This sub-menu can be used to edit various display settings:
¾ Select Brightness to change the brightness value from 0 to 100 (default value is
50) by using the keys /
¾ Select Contrast to change the contrast value from 0 to 100 (default value is 50)
by using the keys /
smart CX20
und /
and / .
and / .
Extended Settings and Functions
, and then press OK.
141