Herunterladen Inhalt Inhalt Diese Seite drucken

O N The R Oad; Before.each.ride - MAGURA VYRON 30.9 Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
o
r
n the
oad
B
efore each rIde
Danger of accident due to component failure.
Before every ride, make sure that the seat post and saddle are cor-
Î –
rectly fitted and will not twist.
Before every ride, actuate the seat post multiple times to make sure
Î –
that your MAGURA seat post is leak-tight and shows no sign of oil leaks
on screws, inner tube and seals, or any other visible mechanical damage.
Before every ride make sure that your seat post operates correctly.
Î –
Î –
Never use your MAGURA seat post in case of visible damage, unusual
noise, or if you are unsure as to its condition. In this case, have your
seat post checked in a specialist bicycle workshop or directly by
MAGURA Service.
[
Switch on the eLECT unit (ON)
C2
)
Press the round button on the remote control 1×.
)
The remote control LED flashes green and red.
Î
Î
The eLECT remote control is "awake" (normal mode).
Î
Î
Check the eLECT rechargeable battery capacity – see
)
, page 30.
rechargeable battery capacity
28
]
.
[
]
E2
Checking the eLECT
a
ctuatIng Seat PoSt
Danger of accident due to improper behaviour during riding.
Always actuate the seat post with the eLECT remote control while
Î –
riding – never directly from the eLECT unit.
Pressing the round button on the remote control actuates the switching
L
L
process inside the seat post:
- press button/valve opens (OPENING ~0.5 s)
- seat post is free (FREE ~0.5 s)
- switching valve closes (CLOSING ~0.5 s)
Within this time window you can lower your seat post (load by body
weight) or extend it (remove the load).
If your desired saddle height is not reached within this time window,
repeat the switching process.
Lowering
Load seat post and keep it loaded (body weight).
)
Press the round button on the remote control 1×.
)
Valve opens (OPENING).
Î
Î
Seat post lowers (FREE) – loaded by body weight.
Î
Î
Valve closes (CLOSING).
Î
Î
Lowering completed.
Î
Î
Extending
Reduce load on seat post.
)
Press the round button on the remote control 1×.
)
Valve opens (OPENING).
Î
Î
Seat post extends (FREE) – actuated by air pressure.
Î
Î
Valve closes (CLOSING).
Î
Î
Extension complete.
Î
Î
[
]
H1
[
]
H1
[
]
H1

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vyron 31.6

Inhaltsverzeichnis