Using The Memory - Sony DSC-1024G Bedienungsanleitung

Using the memory

S
ON/OFF
MENU button
You can store the parameters of the adjusted picture into
memory. Five sets of input/output selection, zooming size,
H/V size and H/V position can be stored into memory and
switched quickly.
Up to 5 memories are available.
Storing the current condition
1 Adjust the picture as necessary.
2 Press the MENU button.
The MENU 1 screen appears.
MENU
/
3 Press the CENT ◊ √ button to move the cursor (z) to
MEM SAVE, and press the ENTER button.
The MEM SAVE screen appears.
The current data is displayed on the left column under
"CURRENT" and the data in the memory on the right
column. If no data is stored in the memory, that item is
shown by "– ."
ENTER
CENT
.
/
4 Press the CENT◊ √ button repeatedly so that the
desired memory number (1 to 5) appears.
CENT
38
TV
IN NTSC PAL
PJ
OFF
OUT NTSC PAL
DISPLAY TEST LINE OUTPUT
COMMAND
MODE ON/OFF PATTERN DOUBLER FORMAT GEN-LOCK
MENU
CENT
ENTER
ENTER button CENT◊/√ buttons
MENU 1
zMEM LOAD
MEM SAVE
GEOM RESET
COLOR RESET
ALL RESET
INDEX NO.
LANGUAGE
USE: ENTER NEXT:MENU
MEM SAVE
CURRENTzMEMORY1
INPUT VIDEO1 –
SIGNAL NTSC –
OUTPUT 31.5k –
ZOOM x1 –
HSIZE 50 –
HCENT 50 –
VSIZE 50 –
VCENT 50 –
USE: ENTER CANCEL:MENU
Current data
Memory number
MEM SAVE
CURRENTzMEMORY3
INPUT VIDEO1 –
SIGNAL NTSC –
OUTPUT 31.5k –
ZOOM x1 –
HSIZE 50 –
HCENT 50 –
VSIZE 50 –
VCENT 50 –
USE: ENTER CANCEL:MENU
OVER FLOW
SIGNAL FORMAT
31.5k 37k 48k 64k OTHERS
31.5k 37k 48k 64k
APERTURE
CHROMA PHASE CONTRAST
SIZE
5 Press the ENTER button.
The current data is stored under the selected memory
number on the right column.
If any data has been stored in the selected memory
number, it is now displayed on the left column under
"CURRENT."
ENTER
6 To quit the menu, press the MENU button three times.
Calling up the stored data
1 Press the MENU button.
The MENU 1 screen appears.
/
2 Press the CENT ◊ √ button to move the cursor (z) to
MEM LOAD, and press the ENTER button.
The MEM LOAD menu appears.
/
3 Press the CENT ◊ √ button repeatedly to select the
desired memory number (1 to 5), and press the ENTER
button.
The converter is adjusted to the selected memory data.
4 To cancel the operation, press the MENU button twice.
To call up the stored data quickly
Use the remote commander. See "Direct memory loading" on
page 40.
OPEN SCAN CONVERTER DSC-1024G
INPUT SELECT
STILL
1 2 3
ZOOM
MEM SAVE
CURRENTzMEMORY3
INPUT VIDEO1 VIDEO1
SIGNAL NTSC NTSC
OUTPUT 31.5k
ZOOM x1
HSIZE 50
HCENT 50
VSIZE 50
VCENT 50
USE: ENTER CANCEL:MENU
Current data stored
MEM LOAD
MEMORY1zCURRENT
INPUT VIDEO1 VIDEO2
SIGNAL NTSC
OUTPUT 31.5k
ZOOM x1
HSIZE 50
HCENT 50
VSIZE 50
VCENT 50
USE: ENTER CANCEL:MENU
31.5k
x1
50
50
50
50
NTSC
64k
x2
50
80
60
80