Operation - Canton Smart Vento 9 Bedienungsanleitung

English

Operation

2
1
5
7 OK
8
PLAY
9 M
SOUND
MODE
11 1 2 3
14
15
Remote
66
1) Change of operating state (power)
On
Standby
Off (disconnected from mains)
2) Mute
3
3) Upwards
6
4) Downwards
4
5) Confirmation (OK)
10
6) Plus (+)
7) Minus (–)
13
8) Menu (M)
12
9) Switches between playback modes (Play Mode)
Stereo (ST)
Movie (MOV)
Music (MUS)
Note: Play Mode "MUS" is not available with existing Surround speakers� When using the
symmetrical analogue input (XLR) or the asymmetrical analogue input (AUX) with direct
connection to the two speakers, only the Play Mode "ST" is available�
10) Change between the sound settings (Sound)
Bass (BAS)
Midrange (MID)
Treble (TRE)
– LED on the speaker shines green
– LED on the speaker shines red
– LED on speaker not illuminated
– Switches the signal input forwards / moves the selection
field up in the menu
– Switches the signal input back / moves the selection
field down in the menu
– Switches to the next menu level / confirms a setting
– Increases the volume / increases the value in the menu
– Decreases the volume / decreases the value in the menu
– Switches to the setting menu / Switches to the previous
menu level
– Music playback
– (Virtual) Ambient sound for home theatre playback
– Virtual stereo sound for music playback
– Low-frequency adjustment via "+/–" keys (+ 6dB���–6 dB)
– Midrange adjustment via "+/–" keys (+ 6dB...–6 dB)
– Treble adjustment via "+/–" keys (+ 6dB...– 6dB)