Exposure Menu - Eneo VKCD-13120F2810 Montage- Und Betriebsanleitung

6.3 EXPOSURE Menu

EXPOSURE menu provides the parameters which control the light level and enhance the dynamic range of video.
EXPOSURE Default
SHUTTER/AGC AUTO
WDR -
FLICKERLESS OFF
HLC/BLC -
Descriptions
Can set to AUTO or MANUAL.
AUTO - Video level is automatically controlled to follow the settings of EXPOSURE
MODE, BRIGHTNESS, GAIN-UP SEQ and SENS-UP.
See 6.3.1 SHUT/AGC AUTO setup for detail.
MANUAL - Video level is defined by the settings of SHUT MODE, SHUT and AGC.
Video level at MANUAL mode can't be maintained and may be white out by high
luminance because shutter is not variable in this mode.
See 6.3.2 SHUT/AGC MANUAL setup for detail.
Can set WDR mode, VISIBILITY, WDR FLK COMP. and WDR CR COMP.
See 6.3.3 WDR (ATR-EX) SETUP for detail.
When a NTSC (PAL) camera is operating at 50Hz(60Hz) florescent light, video flickers
too much.
FLICKERLESS ON can reduce the flicker significantly.
However the sensitivity decreases about 30% too and WDR function will be decrea-
sed significantly.
Can set HLC on/off, CLIP LEVEL, SCALE and BLC.
See 6.3.4 HLC/BLC setup for detail.
47