Universal Commands; Hart-Command 0 : Read Transmitter Unique Identifier; Hart-Command 1 : Read Primary Variable; Hart-Command 2 : Read Current And Percent Of Range - ABB COPA-XE Betriebsanleitung

Erstellt von
Name: Holger Seebode
Datum:
9.7.1998

3 Universal Commands

3.1 HART-Command 0 : Read Transmitter Unique Identifier

Request none
Data Bytes
Response #0
Data Bytes #1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
Response 0
Codes 5

3.2 HART-Command 1 : Read Primary Variable

Request none
Data Bytes
Response #0
Data Bytes #1..#4
Response 0
Codes 5
Bemerkung

3.3 HART-Command 2 : Read Current and Percent of Range

Request none
Data Bytes
Response #0..#3
Data Bytes #4..#7
Response 0
Codes 5
HART-Protokoll
Gerät: COPA/MAG-XE, 50XE4000
Software: HART-Software
Kennung: D699B180 X.10
Projektnummer:
Device Type Code for Expansion
Manufacturer Identification Code
Manufacturer Device Type
Number of Request Preambles
Revision Level of Universal Command
Revision Level of Transmitter Document
Software Revision Level
Hardware Revision Level
Flags, none defined at this time
Device Identification Number, 24 Bit, MSB
Device Identification Number, 24 Bit
Device Identification Number, 24 Bit, LSB
No Command Specific Error
Incorrect Byte Count
Primary Variable Unit Code (Table 2)
Primary Variable, IEEE 754
No Command Specific Error
Incorrect Byte Count
Primary Variable => Durchfluß
Analog Output Current mA, IEEE 754
Percent of Range, IEEE 754
No Command Specific Error
Incorrect Byte Count
Revision:
0
Name:
Holger Seebode
Datum:
9.7.1998
Revision
= 254
= 18 = B-F&P
= 8 = XE4000
= 8
= 5
= 0
= 1
= 0 oder 1
= 0
= 0
= MSB Gerätenummer
= LSB Gerätenummer
Revision
Revision
3-1