Maintenance And Care; High-Pressure Pump - Kärcher HD 1050 B Bedienungsanleitung

Transport
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Use the pushing handle to push the ap-
pliance.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Storage
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Maintenance and care

You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
Note
The maintenance plan given below only
lists the maintenance tasks for the high-
pressure pump. The maintenance tasks for
the engine must also be done according to
the details given in the operating instruc-
tions manual of the engine manufacturer.
Warning
Risk of injury if the machine is left running
in an unattended state. Remove the spark
plug before doing any work on the appli-
ance.
Risk of burns! Do not touch hot silencers,
cylinders or radiator ribs.

High-pressure pump

Daily
Check the high pressure hose for dam-
ages (risk of bursting). Please arrange
for the immediate exchange of a dam-
aged high-pressure hose.
Weekly
Check oil level.
Please contact Customer Service immedi-
ately if the oil is milky (water in oil).
Monthly
Clean the sieve in the water connection.
Clean filter at the detergent suck hose.
After 500 operating hours, at least annu-
ally.
Oil change.
High-pressure pump
Oil change:
Ready a catch bin for appr. 1 Liter oil.
Turn out the oil drain screw.
Drain the oil in a collection basin.
Dispose of old oil ecologically or turn it in
at a collection point.
Turn out the oil drain screw.
Slowly fill in new oil until the "MAX"
marking on the oil sight glass.
Note
Air pockets must be able to leak out.
For oil type refer to technical specifica-
tions.
– 6
EN 17