Standards, Certificates And Approvals - Siemens MP 277 INOX 10 Betriebsanleitung

Safety instructions and approvals

1.3 Standards, certificates and approvals

High frequency radiation
NOTICE
Unintentional operating situations
High frequency radiation, e g. from a cellular phone, can cause unintentional
operating situations.
Intended purpose
Commissioning of the HMI device is forbidden until it has been absolutely ensured that the
machine in which the HMI device is to be installed complies with Directive 98/37/EC or
Directive 2006/42/EG as of 29 December 2009.
1.3 Standards, certificates and approvals
Approvals
The following overview shows the approvals that may be available.
The approvals shown on the rear panel apply to the HMI device itself.
Ex approval
The following approvals apply to the HMI device in accordance with
● EN 60079-0
● EN 60079-15
● EN 61241-0
● EN 61241-1
valid:
44
WARNING
CAUTION
II 3 G
II 3 D
Ex nA II Tx
Ex tD A22 IP6X T xx °C
x ... Temperature values, see design examination certificate
Operating Instructions (Compact), 01/2009, A5E02274759-02
MP 277 INOX 10" Touch, MP 377 INOX 15" Touch