Cycle Computer Configuration - favero assioma uno duo Technische Informationen

9.3. Cleat release force adjustment
Before starting to ride, try to release the shoe several times and make sure that
the release force is suitable.

10. Cycle computer configuration

10.1. Pairing Assioma to the cycle computer
The pairing procedure associates Assioma to the cycle computer to start the radio
communication between the two devices.
Please read the cycle computer manual to learn how to search and pair a power
sensor. Make sure that Assioma is switched on before proceeding (Chap. 6).
Each Assioma has a unique 5-digit ANT+ ID identification number (indicated outside
the box). This number identifies Assioma in the list of devices to pair with the cycle
computer.
Cycle computers with ANT+ technology have to be paired with the left pedal only.
The left pedal will transmit the data collected by the corresponding right pedal
too.
Cycle computers, or other devices, with Bluetooth technology and Cycling Power
Profile (CPP) have to be associated with both the left and the right pedal.
The name of the right-sided Assioma will be recognizable by the R ID identification
number (indicated outside the box).
FAVERO Electronics - 0259-0902 Assioma user manual _Rev09 - EN-IT-DE
Adjust the tension
of the spring depending
on your needs.
The spring tension can be adjusted using the
screw shown in the picture. To tighten
turn clockwise;
to loosen, turn counter-clockwise.
Use a 3 mm wrench (not included in the supply).
Increase
E N G L IS H
Decrease
7