Product Troubleshooting - favero assioma uno duo Technische Informationen

21. Product troubleshooting

Over- or underrated power
• Perform a zero offset with the cycle computer (Chap. 11).
• Check if there is any contact between the shoe or shoe cover and the sensor
(Chap. 9.2).
• Check the setting of the crank-arm length (Chap. 10.3).
Faulty left/right balancing
• Perform a zero offset with the cycle computer (Chap. 11).
• Check if there is any contact between the shoe or shoe cover and the sensor
(Chap. 9.2).
Cadence and power are not displayed
• Activate the product (Chap. 7).
• Configure the cycle computer (Chap. 10).
• Ride evenly to allow self-calibration (Chap. 12).
The LEDs do not switch on
• Fully charge the product (Chap. 13).
• Make sure that the battery charger and the cables supplied are correctly
working (Chap. 13) or use a common smartphone battery charger.
There is no connection to the Favero Assioma App
• Enable the Bluetooth connection on your smartphone.
• Make sure that the smartphone is compatible with the Bluetooth v4 standard
or later versions.
• Disable and again enable the Bluetooth connection on your smartphone.
The force necessary to engage and release the shoe from the pedal is not the one
wanted
• Adjust the tension of the springs using the adjusting screw supplied
(Chap. 9.3).
For more information, read the FAQs on the website: cycling.favero.com.
FAVERO Electronics - 0259-0902 Assioma user manual _Rev09 - EN-IT-DE
E N G L IS H
13