Local Connection Via Router (Home Network) - Bosch BPT-M Touch Installationsanleitung

52 | Telecommunication installation
BPT-M Touch | Installation manual
6.3.3

Local connection via router (home network)

(1) (2)
6.2: Local connection via router
[1]
BPT-M Touch
[2]
Network cable
[3]
Router
[4]
PC
Prerequisites
DHCP service activated in the router.

If no DHCP service is available through the router,
you can change the IP address of the BPT-M Touch
in the submenu IP settings. By default, the IP
address is set to 192.168.0.111. You will find
further information on the help page of the IP
settings submenu.
PC connected with router.

Router switched on.

In network connections, PC set to automatically

obtaining IP addresses.
In the BPT-M Touch, automatic assignment of IP

address enabled.
(3) (4)
Bosch Power Tec GmbH
English