Maintenance And Cleaning; Faults - WIKA P30 Betriebsanleitung

7. Maintenance and cleaning / 8. Faults

7. Maintenance and cleaning

7.1 Maintenance
This instrument is maintenance-free.
Repairs must only be carried out by the manufacturer.
7.2 Cleaning
CAUTION!
Before cleaning, correctly disconnect the instrument from the pressure supply, switch it
■
off and disconnect it from the mains.
Clean the instrument with a moist cloth.
■
Residual media in dismounted instruments can result in a risk to persons, the
■
environment and equipment. Take sufficient precautionary measures.
Do not use any pointed or hard objects for cleaning, since the diaphragm of the process
■
connection must not be damaged.
For information on returning the instrument see chapter 9.2 "Return".

8. Faults

In the event of any faults, first check whether the pressure transmitter is mounted correctly,
mechanically and electrically.
Faults
No output signal
No/wrong output signal
WIKA operating instructions precision pressure transmitter model P-3x
Causes
Cable break
No/wrong power supply or current pulse
Wiring error
Measures
Check the through drilling
Correct the power supply
Observe the pin assignment
EN
21